An Initiative to Alleviate Pressure on Municipal Water Supply in the George Municipal Area

The George Municipal area has been identified as a water-scarce area, and proactive measures are required to ensure sustainable water use. In response, the George Municipality has made provision for a Rainwater harvesting tanks Application process to facilitate the safe installation of Rainwater harvesting tanks on properties within the municipal area.
This initiative aims to encourage responsible water management while reducing pressure on the municipal water supply. Property owners are strongly encouraged to consider installing Rainwater harvesting tanks, particularly for non-potable uses such as garden irrigation, toilet flushing, and general cleaning.
This article outlines the application process, requirements, and key considerations for obtaining municipal approval to install or erect a rainwater harvesting tank within the George Municipal jurisdiction.
Rainwater harvesting tanks are considered Minor Building Works and therefore require approval through the rainwater harvesting tanks Application process. This application is addressed in terms of Section 13 of the National Building Regulation and Building Standards Act.
Municipal tariffs currently exempt rainwater tanks applications from application fees, making the process more accessible to property owners.
All applications must be submitted to and approved by the municipality prior to the installation of a rainwater tank.
Requirements for a Rainwater harvesting tank Application
The following information and documentation must be submitted as part of the application:
- Site plan indicating the proposed position of the rainwater tank
- Tank details, including:
o Type of tank
o Size and storage capacity
o Overflow management, clearly indicated on the plan to prevent flooding or damage to neighbouring properties
o Screening details, confirming that the tank will be suitably screened or obscured from view
Information to be provided when submitting applications, include:
- Applicants must ensure that rainwater harvesting tanks (and other utility structure are indicated on their building plans).
- Where a separate application in terms of these provisions is submitted, the applicant must provide the completed rainwater harvesting tanks application form
- Site plan showing:
– Property boundaries
– Building lines
– Proposed location of the rainwater tank - Tank specifications, including:
– Type of tank (e.g. plastic, steel, concrete)
– Capacity (litres) - Water tank overflow management details clearly shown on the plan
- Screening method indicated (wall, enclosure, fencing, or landscaping)
- Confirmation that the tank is within approved building lines
- Confirmation that the installation does not obstruct servitudes or municipal infrastructure
Guidelines for Location and Positioning of Rainwater harvesting tanks
When positioning a rainwater harvesting tank, the following requirements must be adhered to:
- The tank must not be unsightly or negatively impact neighbouring properties
- The installation must be within the property boundaries
- If the installation exceeds the height of the boundary wall it must not encroach on the approved building lines of the property
- Tanks must be positioned so as not to obstruct access, servitudes, or municipal infrastructure
- No overflow water may be discharged onto neighbouring properties
Property owners are advised to confirm their building lines with the Town Planning Department prior to submitting a rainwater tank application.
📞 Town Planning Enquiries: 044 801 9477
Application forms and guidelines for submission can be requested from Building Control:
📞 044 801 9370/9166/9019